Specifications: Removal of loose concrete and asphalt from existing driveway Path just through yard to rear entrance of shed Connecting main driveway and both paths to shed to entrance/exit lane Grading of rear and front paths to shed Application of Hot-mix asphalt to graded and overlay areas Description: Begin digging out area to form path …
New Driveway Newnan, GA – March 2020
Specifications: Dig and grade drainage ditch Fill ditch with surge stone to assist in water flow and control Dig out and grade areas for paving using GAB Grade non-paved area with #4 stone Apply hot mix asphalt to graded areas Compact areas with roller and plate tamp Backfill with remaining baby surge stone Description: Use …
New Driveway/Water Flow Solution – Jackson, GA 2020
Specifications: Cut driveway through wooded area per customer request Add GAB and Baby Surge for base and water direction Pave area with Hot-mix asphalt Install asphalt curbs to assist with water direction Tie-in to existing concrete at house Description: Dig out path through wooded area with Skid steer per customer request. Grade existing sub-grade to …
Ramada Inn Resurface Macon, GA – Jan 23, 2020
Specifications: Clean debris off of existing concrete Ensure overlay areas are dry Apply hot-tar bonding agent to resurface areas Apply hot-mix asphalt to resurface areas Description: Remove any dirt and debris from existing concrete areas being resurfaced Dry all areas to prepare for tar application Apply hot-tar bonding agent to existing concrete areas in preparation …
Resurface and new addition – Moreland, GA Dec 2019
Specifications: Removal and Sterilization of Vegetation in and Around Area of New Edition (Parking Pad) Removal of Soft Areas in Sub-Grade Add and Grade Gravel to the New Edition Clean and sterilize Areas Being Resurfaced Remove Concrete Near Garage Opening for Tie-In Add Gravel and Grade Driveway Lane as Needed Apply Hot-Tar Bonding Agent to …
New Beginnings Adoption Center Mill and Resurface – Tupelo, MS
Specifications: Mill Existing Asphalt 1.5 Inches Grade and Stabilize Soft Areas in Existing Parking Lot Apply Asphalt Bonding Agent (Hot-Tar) Apply Hot- Mix Asphalt at 1.5 inch Depth Over Parking Lot Description: Mill existing asphalt within specifications Remove asphalt from soft areas Grade and stabilize soft areas Clean debris off of existing asphalt Haul away …